Roger (K8RI), do you have any pictures of your 16" swivel arm? I'm curious if
I could make something like that for myself.
> I use 20' of 1 1/2" galvanized steel fence tubing. with a 16" swivel
> arm at the top so it can lower masting or tower sections in line with
> the tower. It lifts 45G sections with no noticeable flexing. OTOH if
> there is some side force it will spring without bending. I've lifted
> well over 150# with it with very little deflection. I use a pulley on
> top, the lifting pulley is floating on the rope, and the end of the rope
> ties off at the end of the offset arm making heavy lifts relatively easy.
Thanks
John
K7ALA
_________________________________________________________________
Your E-mail and More On-the-Go. Get Windows Live Hotmail Free.
http://clk.atdmt.com/GBL/go/171222985/direct/01/
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|