Both wire and winch will be replaced - now that I have the details
Dwight, NS9I provided, I know what to do.
73's
TomAt 12:25 AM 9/25/2009, David Thompson wrote:
>Great Tom,
>
>I think guying at the top level would do OK. I helped take down a
>RBX 70 25 years ago and it seeme to be a nice tower. Hope the wire
>and winch are OK.
>73 Dave K4JRB
>----- Original Message -----
>From: <mailto:n4nw@n4nw.org>N4NW
>To: <mailto:thompson@mindspring.com>David Thompson ;
><mailto:towertalk@contesting.com>towertalk@contesting.com
>Sent: Thursday, September 24, 2009 6:40 PM
>Subject: Re: [TowerTalk] EZ-WAY RBX/CRX 60-3 tower manual needed
>
>Thanks David,
>
>I got some great info from Dwight NS9I, pictures, manuals and the works!
>
>I have that large base pole and will further enhance the
>installation by guying the top of the 1st section. I intend to use
>the 60' EZ-Way for a 10m long boom 5 el yagi -- yes, I know not much
>ten not but then the tower is not up yet!
>
>Thank you for your feedback.
>
>73's Tom
>
>At 05:27 PM 9/24/2009, David Thompson wrote:
>>Tom,
>>
>>I think EZ-Way had a guy bracket sort of like the Rohn 25 and
>>45. As I recall the RBX-60 was self supporting with the big bottom
>>anchor up to say 10 SQ FEET. I have a Tristao that is usually self
>>supporting but Lou welded guy rings on the top of each
>>section. This could be a possibility.
>>73 Dave K4JRB
>>----- Original Message ----- From: "N4NW" <n4nw@n4nw.org>
>>To: <towertalk@contesting.com>
>>Sent: Thursday, September 24, 2009 9:22 AM
>>Subject: [TowerTalk] EZ-WAY RBX/CRX 60-3 tower manual needed
>>
>>
>>>
>>>>I have a EZ-Way 60' three section tower - looks to be the RBX-60-3.
>>>>I have found some information from manuals on the Internet. I am
>>>>seeking the pages with the parts list, parts specifications (length
>>>>of cables) etc. All manuals I have do NOT have this information.
>>>
>>>The old EZ-Way brochure mentions use of guys on all their towers but
>>>I can find no reference as to how guys would be attached if anyone
>>>has information on this I would appreciate your input.
>>>
>>>The EZ-Way I have is in excellent condx but I still desire to replace
>>>the lift cable, tilt cable and lift winch.
>>>
>>>Thanks & 73's
>>>Tom
>>>
>>>_______________________________________________
>>>
>>>
>>>
>>>_______________________________________________
>>>TowerTalk mailing list
>>>TowerTalk@contesting.com
>>>http://lists.contesting.com/mailman/listinfo/towertalk
>>
>
>
>Tom Gregory, N4NW
>n4nw@n4nw.org
>
>N4NW LLC - Complete Merchant Services
>
>Check out local N4NW weather conditions real-time -->> http://www.n4nw.org
>
>
>
>
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|