Been there, done it, with 2 x 4 pole relays and one +V wire out at a
tower.
Doug
Life is not a spectator sport.
-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] On Behalf Of WB4UNA@aol.com
Sent: January 15, 2009 8:02 PM
To: towertalk@contesting.com
Subject: [TowerTalk] 1 control box on more than 1 rotor
I am going to stick a couple more towers in the air and wondering if
anyone
has tried or done the below .
i would like to operate 2 or more rotors with one control box. They
will al
be TX2 style rotors. I just would like to save some on running all the
rotor
cable to each tower .
It is just a idea....
Thanks Randy
Carlus M. Randy Chavis
WB4UNA since 1970
432 tru 160
EM 93
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|