Dick Green WC1M wrote:
> Well, this must be one of those YMMV situations.
>
>
Apparently <:-))
> All I can say is that on EHS near the 10% target tension, my Loos reads
> about 30% high compared with a Dillon dynamometer. At the low end of the
> scale, it's off by about 50%. At the high end of the scale, it's off by
> about 20%. Undoubtedly one of the gauges is off.
I'm running Phyllistran with 10 to 15' headers of EHS at the bottom. It
seems to matter little whether I put the gage on the Phyllistran or EHS.
Roger (K8RI)
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|