You can only use 1 at a time, unless your running some type of diplexor.
Any coax switch will work. CS-201.
Mike VA3mW
On Sun, May 4, 2008 at 7:11 PM, Roger (K8RI) <K8RI-on-TowerTalk@tm.net>
wrote:
> Jeff Stevens wrote:
> > Looking at the Alpha Delta coax switches, I see the "Application
> > Information" notes that the switch can be used with two receivers and
> > one antenna. The use of two *transceivers* with one antenna is
> > conspicuously absent.
> >
> > What switching options are available to allow the switching of one
> > antenna between two transceivers? I'm looking for a manual switch for
> > use right in the shack.
> >
>
> I've used the AD switches with a pair of duoband VHF/UHF radios for a
> number of years with no problems. I've never tried is on HF but I think
> the isolation is good enough to prevent damage. Just remember there are
> no interlocks to prevent transmitting on the wrong radio into either a
> short or open.
>
> Roger (K8RI)
> > Tired of re-arranging jumpers all of the time. :^)
> >
> > -Jeff
> > KE7FRJ
> >
> > _______________________________________________
> >
> >
> >
> > _______________________________________________
> > TowerTalk mailing list
> > TowerTalk@contesting.com
> > http://lists.contesting.com/mailman/listinfo/towertalk
> >
> >
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|