Towertalk
[Top] [All Lists]

[TowerTalk] Portable Mast Guy Rings?

To: <towertalk@contesting.com>
Subject: [TowerTalk] Portable Mast Guy Rings?
From: "Alan...KI6HPO" <opalockamishabob@yahoo.com>
Date: Sat, 12 Jan 2008 15:46:12 -0800
List-post: <mailto:towertalk@contesting.com>
I side with N7KA. 

I found something that worked for me at Home Depot in the electrical dept. What 
I bought for $3 each is a UV resistant cap for an electrical conduit [if memory 
serves]. It is white 'plastic"; it is 4 1/4" in diamter and 3/16" thick. Each 
is shrink sealed in plastic wrap. 

Each comes with a black gasket for sealing out water, 4 stainless steel screws 
and the best part is that there are 4, 3/16" holes already drilled around the 
circumference of the thing. The bar code number on the back of these caps is, 
E365CW.

Now, all I've got to do is drill out the center hole for the mast diameter.

Hope this helps,

Alan...KI6HPO
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>
  • [TowerTalk] Portable Mast Guy Rings?, Alan...KI6HPO <=