Towertalk
[Top] [All Lists]

Re: [TowerTalk] Rohn tower U-bolts

To: "Richard L. King" <k5na@ecpi.com>
Subject: Re: [TowerTalk] Rohn tower U-bolts
From: "" <djszumla@bluefrog.com>
Date: Thu, 24 Jan 2008 17:03:31 -0800
List-post: <mailto:towertalk@contesting.com>
Googled galvanized u-bolts. Found this link. 
http://www.sabresitesolutions.com/viewItem.aspx?kit=60035&menu=Hardware_Components_click
Hope this helps...

--- k5na@ecpi.com wrote:

From: "Richard L. King" <k5na@ecpi.com>
To: towertalk@contesting.com
Subject: [TowerTalk] Rohn tower U-bolts
Date: Thu, 24 Jan 2008 15:14:53 +0000

I need some Rohn tower galvanized U-bolts to attach accessory plates 
to the legs of Rohn 25G and 45G. I think the U-bolt size for both 
size tower accessory plates will be the same.

I have been looking around the web for these items and don't seem to 
be looking at the right place.

I have several accessory plates that are missing U-bolts or the 
U-bolts were previously replaced with the wrong material and are now rusted.

Generally speaking the U-bolts are 3 inches long, 1.5 inch inside 
diameter, and threaded about 1.5 inches. I think, but not sure, that 
they are about 5/16th in diameter.

Where have other folks found the official replacement for these U-bolts?

73, Richard - K5NA

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>