Towertalk
[Top] [All Lists]

Re: [TowerTalk] 160 meter receiving loop antenna schematic hasbeenposted

To: "'Richard (Rick) Karlquist'" <richard@karlquist.com>,"'Top Band Reflector'" <topband@contesting.com>,"'reflector -tower'" <towertalk@contesting.com>,"'NCCC'" <nccc@contesting.com>
Subject: Re: [TowerTalk] 160 meter receiving loop antenna schematic hasbeenposted
From: "Scott MacKenzie" <kb0fhp@comcast.net>
Date: Tue, 1 Jan 2008 16:25:04 -0500
List-post: <mailto:towertalk@contesting.com>
What size would you suggest for 80M?

-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] On Behalf Of Richard (Rick)
Karlquist
Sent: Tuesday, January 01, 2008 3:21 PM
To: Top Band Reflector; reflector -tower; NCCC
Subject: [TowerTalk] 160 meter receiving loop antenna schematic has
beenposted

Due to numerous requests, I have posted a schematic
of the 160 meter receiving loop antenna that I used in
the recent Stew Perry contest.  This is what worked
(well) for me.  As always, YMMV.

The feed system seems intuitively obvious to me but
no one seems to do it this way.  Don't ask me why :-)
The 4 foot size was chosen because this was originally
a 2.5 MHz loop for receiving WWV.  For 160m, you might
want to make a somewhat bigger loop to get more output,
although this size was adequate.

See:

http://www.n6rk.com/160RXloop.jpg

Rick N6RK
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>