As long as the exciting pad is of the correct size and concrete is in good
condition I would use concrete epoxy and bolts for the job. Hilti make wide
range of different systems to do this with.
http://www.hilti.com/holcom/modules/home/home_main.jsp I see would check
with them for there recommend product and use. You might need a P.E. to
design and sign off on it. 73 Gene K2QWD
----- Original Message -----
From: "TOMMY HALIBURTON" <ROCKETJ10@MSN.COM>
To: "towertalk" <towertalk@contesting.com>
Sent: Sunday, December 16, 2007 11:49 PM
Subject: [TowerTalk] US TOWER TMM-541SS
> To All,
>
> I have a friend who desires to erect a new TMM-541SS tower. He already has
> a concrete pad poured and would like to drill holes, place bolts, and
> concrete same without having to remove the entire pad. Is this a feasible
> task and if so, how might one accomplish same?
>
> Thanks, in advance, for any assistance you may give.
>
> Semper Fi,
>
> Tommy - K6YE
> DX IS
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|