I found this post, below, in the archives and thanks
to the author for researching an alternative source
for these connectors. Has anyone ordered one of these
and does it work?
Bob
W1RH
Warning... this is from "eye ball" observation and I
haven't ordered any to
check...
The 7-pin connector appears to be a series "JR"
connector (Japanese Round)
with a size "16" shell. The general part number for a
waterproof 7-pin,
size 16 shell plug, with solder socket pins is:
"JR16WP-7S". Digikey stocks
the Hirose brand as their part number HR914-ND at
$15.30 each. You will
also need the cable strain relief clamp which is
Hirose # JR16WCCA-x where x
is the cable diameter, 4, 6, 8, 10 or 12 mm. The
Digikey number is
HR100x-ND where x is 3 for 4 mm., 4 for 6 mm., 5 for 8
mm.,... , 7 for 12
mm. and the cost is $7.22 each for a total of $22.52
per connector set.
The non-waterproof series includes the strain relief
and runs about $7
cheaper in total.
See
<http://www.hirose.co.jp/cataloge_hp/e11420015.pdf>
and <http://www.digikey.com>.
____________________________________________________________________________________
Be a better friend, newshound, and
know-it-all with Yahoo! Mobile. Try it now.
http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|