Towertalk
[Top] [All Lists]

Re: [TowerTalk] 160 inv L....data....need some experience....

To: "Tower Talk List" <towertalk@contesting.com>
Subject: Re: [TowerTalk] 160 inv L....data....need some experience....
From: "Jim Brown" <jim@audiosystemsgroup.com>
Date: Thu, 13 Dec 2007 12:19:39 -0800
List-post: <mailto:towertalk@contesting.com>
On Thu, 13 Dec 2007 13:16:09 -0600, John wrote:

>Resonant at 1820 KHz....

>Z......100 ohms

>L......9.5 uH

>C......900 pf

>SWR with above data is 4:1

>What does this tell me?  

I don't trust this data -- it doesn't make sense. First, 9.5uH and 
900 pF resonates at 1.722 MHz. Second, if it's 100 ohms at 
resonance, that's a 2:1 VSWR, not 4:1. Third, 100 ohms at 
resonance for the antenna you describe doesn't sound right -- it 
ought to be on the order of 30-40 ohms, depending on the loss in 
your ground system. 

Perhaps you are misunderstanding the data readout in whatever 
analyzer you are using. 

If the C and L numbers are good, so the antenna resonates at 1722 
kHz, it would look like a significantly higher value of R and some 
value of L at 1820 kHz. 

How did you decide that resonance was 1820? Lowest SWR? Zero 
reactance?  Does your analyzer give you R + jX? If so, what are 
those values in 20 kHz increments between 1700 and 1900 kHz?   

73,

Jim Brown K9YC





_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>