Towertalk
[Top] [All Lists]

Re: [TowerTalk] Stacked antenna spacing

To: "W5CPT" <w5cpt@bellsouth.net>, <towertalk@contesting.com>
Subject: Re: [TowerTalk] Stacked antenna spacing
From: "jeremy-ca" <km1h@jeremy.mv.com>
Date: Mon, 8 Oct 2007 20:17:32 -0400
List-post: <mailto:towertalk@contesting.com>
You didnt say how tall that tower will be. Many 6M openings are high angle 
so you might consider mounting the loop down low in the 20-30' range on a 
side arm bracket. Or mount it on a mast attached to the house.

Carl
KM1H


----- Original Message ----- 
From: "W5CPT" <w5cpt@bellsouth.net>
To: <towertalk@contesting.com>
Sent: Monday, October 08, 2007 5:58 PM
Subject: [TowerTalk] Stacked antenna spacing


>I have an interesting quandary.  Having finished (at least for now) the HF 
>tower, I have turned my attention to next summer's project which is a 6m & 
>2M tower. My plans include a 5L 6M with a 16 foot boom, a 10L 2M with an 18 
>foot boom and (here's the kicker) a 6M Square Loop. I want the 6M Yagi for 
>the gain and directivity but I also want the loop for monitoring purposes. 
>When I last had the 6M Yagi up, I would often miss openings because 
>activity would happen off the side or back of the antenna. The loop being 
>omni directional would solve that problem, but presents another. How far 
>apart would I have to separate the two 6M antennas so the Loop would not 
>skew the pattern of the Yagi?  I have had the 6M and the 2M antennas 
>together with about 6 feet between them and they both worked well, but 
>adding another 6M to the mix concerns me.  Any ideas?
>
>
>
>
>
> Clint - W5CPT
>
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
> 

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>