[TowerTalk] m2 Orion 2800PP - Increasing Output Voltage

["Ron Chambers" <rwchambers@gmail.com>]

Any one know of a suitable replacement source for the power transformer in
the m2 Orion 2800PP controller that has a HIGHER secondary output voltage?
And wouldn't require too much MOD to the PW circuitry? (power cable is
already in the ground and voltages at the prop-pitches are a little low at
the end of the longest run). Or other suggestions and solutions?
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk