makes no sense to me
chet
----- Original Message -----
From: <K7LXC@aol.com>
To: <towertalk@contesting.com>; <kb2m@comcast.net>
Sent: Sunday, April 22, 2007 1:00 PM
Subject: Re: [TowerTalk] FW: Rohn-25G Removal
>
> In a message dated 4/22/2007 8:43:23 A.M. Pacific Daylight Time,
> towertalk-request@contesting.com writes:
>
>> What I'm looking for is a set of two tower jacks (local name?). One
> piece
> of a tower jack is a stiff piece of pipe with feet on one end, the other
> end has what appears to be a upward pointing rake. In the middle is a
> mechanical jack, that is fully extended. Fully extended it is then placed
> against the tower and used to jack the tower down , or fully closed it
> is
> then used to jack the tower up. The second part is a piece of pipe with
> feet
> on one end, and what appears to be a stiff up pointing rake, no jack.
> This
> is used to hold the tower up while the jack is repositioned. Using these
> two
> pieces a tilt over tower can be easily, and safely raised or lowered.
> A pair of tower jacks is used to erect or lower a one piece stand-alone
> tower.
>> A front end loader or pickup could also be used , if there is room for
> the
> vehicle.
>
>
> Interesting but I've still got no idea what you mean. A picture's
> worth 1k words.
>
> Cheers,
> Steve K7LXC
> TOWER TECH
>
>
>
> ************************************** See what's free at
> http://www.aol.com.
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|