| To: | <TowerTalk@contesting.com> |
|---|---|
| Subject: | [TowerTalk] Rotator help! |
| From: | "Jim Miller WB5OXQ" <wb5oxq@grandecom.net> |
| Date: | Mon, 4 Sep 2006 10:54:42 -0500 |
| List-post: | <mailto:towertalk@contesting.com> |
I have a Yaesu g-400rc rotator that the indicator on the control box just spins
whenever the power switch is turned on. the left and right controls still move
the beam ok and I checked the pot in the rotator motor and the cable and all
are good. Apparently I need repair or replacement of the control box. any
ideas?
Jim & Ella Miller
WB5OXQ & KA5EPM
Abby & Sparky
Dalmatian Furbabies
Waco, TX
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Re: [TowerTalk] C31 - 1 feed line or 3, mike l dormann |
|---|---|
| Next by Date: | [TowerTalk] Tower Safety book, harnesses and antenna wire, Craig Clark |
| Previous by Thread: | [TowerTalk] Black on Cu, Nick Pair |
| Next by Thread: | [TowerTalk] Tower Safety book, harnesses and antenna wire, Craig Clark |
| Indexes: | [Date] [Thread] [Top] [All Lists] |