I have a motorized crankup tiltover Tristao tower of 3 20 ft sections that
extends to 54 feet. The tiltover pivots at the TOP of the base section at
about 7 or 8 feet so it is nearly balanced on tiltover. It is on the
ground
right now due to a move. It is MUCH heavier than the towers I see on the
US
Tower website. They are the closest thing I have found to what I have but
do not believe the (unknown) model I have is available today. It is out in
the country so I can't measure it to compare to whatever gets posted here.
73, Jim
----- Original Message -----
From: "Dino Darling" <k6rix@earthlink.net>
To: <TheValiantKid@aol.com>
Cc: <towertalk@contesting.com>
Sent: Tuesday, February 14, 2006 10:00 PM
Subject: Re: [TowerTalk] tristao 50 ft motorized crank up HELP
> I can help you with identifying this tower. I need you to measure
> the base section and the top section. Does this tower have Z bracing?
>
> Do NOT lag this to your house! If you have what I think you have,
> you don't need to do this. You also have options for a base which
> would include a t-plate which wasn't an option for the old Tristao
towers.
>
> Tristao later became US Tower so you can buy a base from them. You
> will need to provide them with the same dimensions I'm asking for.
>
> Dino
>
> At 03:31 PM 02/14/2006, TheValiantKid@aol.com wrote:
> >i don't know the model no. or anything like that but the trisao name
plate is
> >there the tower measures 3 sections 20 ft each so i presume that it
cranks to
> >50 ft for stress perposes here's the thing i can get the tower for
150.00
> >plus a 20 to 40.00 delivery fee.The thing is they don't have the
> >base plate and
> >don't know the concrete size foundation needed so can anyone help on
> >this issue
> >before i purchase it as the town i'm in wants specs does anyone know
where to
> >get a manul or what the spes may be or where i can get a base late .This
> >baby looks like new and is very heavy so any help with the bae
> >needed would be
> >nice i was gonna dig a 6 bsq by 5 deep against the house foundation and
lag
> >into my house so it doesn't pull away
> >Thanks John In R.I. KB1MWK
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|