Towertalk
[Top] [All Lists]

Re: [TowerTalk] Need Cu Wire Supplier

To: "TowerTalk" <towertalk@contesting.com>
Subject: Re: [TowerTalk] Need Cu Wire Supplier
From: "Keith Dutson" <kdutson@sbcglobal.net>
Date: Thu, 13 Oct 2005 13:37:00 -0500
List-post: <mailto:towertalk@contesting.com>
Yes.  The one-shots are for either stranded or solid.  I was thinking solid
bare wire would be cheaper.

Keith

-----Original Message-----
From: Jim Lux [mailto:jimlux@earthlink.net] 
Sent: Thursday, October 13, 2005 12:33 PM
To: Keith Dutson; TowerTalk
Subject: Re: [TowerTalk] Need Cu Wire Supplier

At 09:22 AM 10/13/2005, Keith Dutson wrote:
>The single point ground system at my station needs an upgrade.  A case 
>of Cadweld for 2 gauge wire has been obtained.  Now I need to locate a 
>supplier for 2 ga solid copper wire.  Any recommendations?  Thanks.
>
>73, Keith NM5G



Solid AWG2?  Isn't that more like "1/4" diameter round bar stock"

Do your oneshots work for stranded?  AWG 2 stranded is much, much easier to
come by, and probably easier to work. 

_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather 
Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions 
and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>