| To: | "'Richard (Rick) Karlquist (N6RK)'" <richard@karlquist.com>,"'W0UN -- John Brosnahan'" <shr@swtexas.net>,"'Pat Barthelow'" <aa6eg@hotmail.com>, <towertalk@contesting.com> |
|---|---|
| Subject: | Re: [TowerTalk] Rebar cutting/Sawsall? |
| From: | "monty taylor" <montytaylor@texoma.net> |
| Date: | Fri, 27 May 2005 16:43:17 -0500 |
| List-post: | <mailto:towertalk@contesting.com> |
I use my skil saw for sheet metal cutting and it can be used for re-bar. All I do is put the plywood blade on backwards and it becomes a circular file! You can not go the other way again, but you have a handy metal cutting saw after that. It really works well on sheet metal. Be careful because that rebar gets red hot! Regards, Monty/WB5GLB since 1969 _______________________________________________ See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA. _______________________________________________ TowerTalk mailing list TowerTalk@contesting.com http://lists.contesting.com/mailman/listinfo/towertalk |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Re: [TowerTalk] Rebar cutting/Sawsall?, Richard (Rick) Karlquist (N6RK) |
|---|---|
| Next by Date: | [TowerTalk] Tri-Ex Tower Info Needed, Craig Sande |
| Previous by Thread: | Re: [TowerTalk] Rebar cutting/Sawsall?, Richard (Rick) Karlquist (N6RK) |
| Next by Thread: | Re: [TowerTalk] Rebar cutting/Sawsall?, Roger K8RI on Tower |
| Indexes: | [Date] [Thread] [Top] [All Lists] |