Towertalk
[Top] [All Lists]

Re: [TowerTalk] AlfaSPID rotor comments

To: <towertalk@contesting.com>
Subject: Re: [TowerTalk] AlfaSPID rotor comments
From: <va3pl@cuic.ca>
Reply-to: va3pl@cuic.ca
Date: Tue, 2 Dec 2003 11:24:15 -0500
List-post: <mailto:towertalk@contesting.com>
Will AlfaSPID fit in top section of US Towers TX455?
Andy - VA3PL


----- Original Message -----
From: <kb9cry@comcast.net>
To: <TowerTalk@contesting.com>
Sent: Tuesday, December 02, 2003 10:33 AM
Subject: Re: [TowerTalk] AlfaSPID rotor comments


> Yup, the Spid has a very simple yet robust design.  Nice worm gear system,
no brake, no stops.  Just two wires for the motor (12-24 VDC).  Direction is
switched in the controller by simply switching the polarity.  Then two more
wires for the magnetic pickup positioner.  The control box is a thin box
with large digital readout for the direction; nice when one gets a little
older and has trouble seeing small meter print.  So only four wires out to
the rotator.  North is determined electronically as well as the end stops;
makes a great rotator for side mounts where you want less than 360 deg of
rotation.  Also one can enter in 6 presets that are activated with a special
external mouse which has buttons on its sides.  Finally you can hook your
computer to the control box and have your logging program turn your beam.
And at the same price or less of comparable units and better specs, it's the
rotator to have.  Oh, the motor and positioner pickup are externally mounted
to the unit
>   so one could replace these without removing the rotator from the tower,
I do believe.  I'm very pleased with mine and I'll let all know how it fairs
this winter after some good Chicago ice storms.
> > the mechanical design of the SPUD looks great, dunno about the indicator
> > system,
> >
> > Simple wiring, Zero (north or south) is set
> > > in the shack, and you have 720 deg of rotation.
> >
> > My feedlines don't!
> >
> > Does sound like a lot of happy VE customers, you guys get much lightning
> > up that a way?
> >
> > 73,
> >
> > Jim, K4OJ
> >
> >
> >
> > >
> > > Doug
> > >
> > > --
> > > Doug Renwick VA5DX
> > > PO Box 50, Clavet, Saskatchewan, Canada S0K 0Y0
> > > VE5RA@sasktel.net
> > > First VE5 9BDXCC
> > > What profit it a ham if he gains all the awards yet forfeits his soul?
> > > I'll run the race and I will never be the same again.
> > >
> > >
> > > _______________________________________________
> > >
> > > See: http://www.mscomputer.com  for "Self Supporting Towers",
"Wireless
> > Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with
any
> > questions and ask for Sherman, W2FLA.
> > >
> > > _______________________________________________
> > > TowerTalk mailing list
> > > TowerTalk@contesting.com
> > > http://lists.contesting.com/mailman/listinfo/towertalk
> > >
> >
> >
> > _______________________________________________
> >
> > See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless
Weather
> > Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any
questions
> > and ask for Sherman, W2FLA.
> >
> > _______________________________________________
> > TowerTalk mailing list
> > TowerTalk@contesting.com
> > http://lists.contesting.com/mailman/listinfo/towertalk
> _______________________________________________
>
> See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any
questions and ask for Sherman, W2FLA.
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>

_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather 
Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions 
and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>