I searched the archives for this problem but the remedy given doesn?t
help in my situation. Here?s the problem. When my rotor is pointed to
the west / southwest and stopped there it doesn?t want to restart. The
first thing I did was to make sure the coax was not binding, and then I
loosened the mast clamp and tried the rotator with no load and still had
the problem. I took it down from the tower yesterday and tried it
plugged directly plugged into the control box. Everything worked fine.
As per suggestions on the reflector I installed new rotor cable and
reinstalled the rotor. The problem was back. So what I know is that it
is not binding, coax is not interfering and there is new rotor cable.
Any other suggestions other than sending it to CATS. I am concerned that
it will bench test OK for them. Thanks fin advance for the help.
Jim NØWE
jbrown@luminet.net
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|