Towertalk
[Top] [All Lists]

Re: [TowerTalk] Largest 20M Array

To: "Chuck Dietz" <w5pr@swbell.net>,"Bob Maser" <bmaser@tampabay.rr.com>, <towertalk@contesting.com>
Subject: Re: [TowerTalk] Largest 20M Array
From: "Gerald D'Entremont" <w5ba@compuserve.com>
Date: Wed, 29 Oct 2003 22:02:13 -0600
List-post: <mailto:towertalk@contesting.com>
actually, I'd LOVE to have my TB6EM at 40'...never mind the CL-205...
unfortunately, they remain at 0' until a) I find a way around the
'Architectural
Control Committee here in town or b) find a way to get a fully loaded cement
mixer through/over the cattle guards at the ranch...
...FWIW, my SB-220 runs on a dedicated 20A 220V breaker...but only
because I have not yet run another two 220 lines to the other side of the
shack where the RF-103's are...

Gerald  W5BA

----- Original Message -----
From: Chuck Dietz <w5pr@swbell.net>
To: Bob Maser <bmaser@tampabay.rr.com>; <towertalk@contesting.com>
Sent: Wednesday, October 29, 2003 5:22 PM
Subject: Re: [TowerTalk] Largest 20M Array


>
>
> > Most of you guys are probably running a TB6EM at 40'
> > Bob W6TR
> >
> Here in Texas we use those to point at the Coast to keep you guys off our
> frequency...
>
> Chuck W5PR
>
>
> _______________________________________________
>
> See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any
questions and ask for Sherman, W2FLA.
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather 
Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions 
and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>