Towertalk
[Top] [All Lists]

[Towertalk] 450 line strain relief

To: <towertalk@contesting.com>
Subject: [Towertalk] 450 line strain relief
From: bjk@ihug.co.nz (Barry Kirkwood)
Date: Wed, 1 Jan 2003 21:37:22 +1300
Thanks very much to all who contributed on this topic.
Have just emerged from my workshop.
5mm thick rectangular fibreglass plate to which is fitted two saddle =
plates made from ordinary fibreglass circuit board (copper removed) =
secured to main plate by stainless steel bolts with spring washers.
Have made holes on centre line both top and bottom, top one for the =
suspension point, lower one to carry a monofilament line threaded thru =
the feedline so as to stabilise it when the wind blows.
My ladder line danced about madly in the breeze. Am looking at about =
70ft vertical drop, so stablisation might be a good idea.
Thanks again: always impressed by the knowledge to be gained from this =
group.
73
Barry

end
Barry Kirkwood PhD ZL1DD
Signal Hill Homestay
66 Cory Road
Palm Beach
Waiheke Island 1240
NEW ZEALAND
ph/fax 64-9-372-5161
www.waiheke.co.nz/signal.htm

--- StripMime Report -- processed MIME parts ---
multipart/alternative
  text/plain (text body -- kept)
  text/html
---

<Prev in Thread] Current Thread [Next in Thread>