Howdy to all,
Just for interest. One other source for ginpoles for most brands of towers
is w9iix. He will customize the clamp if needed
<http://www.w9iix.com/contents.htm>. I have purchased several items from
Doug. He has always been most accommodating for custom order galvanized
parts/brackets and so on....
At 12:39 PM 8/7/2001 -0600, you wrote:
>ROHN also made a gin pole attachment device that could be
>used on folded metal legs for their HDBX series towers.
>(Perhaps I should say that I *assume* that ROHN made the device)
>
>It consists of two separate round clamp holders for the mast
>with a hinged bracked that has a cylindrical pawl that screds
>into the wedge of the tower. (The adjustment screw is perpendicular
>to the cylinder). I have only seen one pair of these things in my
>lifetime.
>
>Tom N4KG
List Sponsored by AN Wireless: AN Wireless handles Rohn tower systems,
Trylon Titan towers, coax, hardline and more. Also check out our self
supporting towers up to 96 feet for under $1500!! http://www.anwireless.com
-----
FAQ on WWW: http://www.contesting.com/FAQ/towertalk
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
|