I hope this doesn't sound as dumb as it looks.........but........is there
any reason why these comments would or would not apply to the RCS-8V? I
just picked one up and have not put it in service yet.
Thanks,
Chris
W7JPG
----------
> From: David Jordan <wa3gin@erols.com>
> To: K6TFZ@aol.com
> Cc: towertalk@contesting.com
> Subject: Re: [TowerTalk] Re: RCS-4
To: <towertalk@contesting.com>
> Date: Monday, February 05, 2001 7:50 AM
>
> Check the voltage at the relay unit...I've run into similar problems
where the
> control voltage was low and the relays buzzed but not chattered causing a
very
> fast hum type noise. Also check the resistance of the relay
windings...the
> windings may have intermittents which may cause noise...
>
> HAVE FUN,
> dave
> WA3GIN
>
> K6TFZ@aol.com wrote:
>
> > The most clockwise position (northeast) is the same as off and
operates
> > straight through. That is why there is no noise in that position. No
relay is
> > activated. As for the noise: haven't had the problem. Sorry. K6TFZ
> >
>
>
> --
> FAQ on WWW: http://www.contesting.com/FAQ/towertalk
> Submissions: towertalk@contesting.com
> Administrative requests: towertalk-REQUEST@contesting.com
> Problems: owner-towertalk@contesting.com
--
FAQ on WWW: http://www.contesting.com/FAQ/towertalk
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
|