This is true, I have replaced the traps of my old 40-2CD this summer, and the
new ones they had SS screws.
73,Jaime.
-----Original Message-----
From: Fred Hopengarten [SMTP:k1vr@juno.com]
Sent: Tuesday, October 21, 1997 2:32 AM
To: harpole@pegasus.cc.ucf.edu
Cc: towertalk@contesting.com
Subject: Re: [TowerTalk] Cush 40-2 CD rust
From:
Fred Hopengarten K1VR 617/259-0088
Six Willarch Road
Lincoln, MA 01773-5105
permanent e-mail address: fhopengarten@mba1972.hbs.edu
On Mon, 20 Oct 1997 13:58:28 -0400 (EDT) "Charles H. Harpole"
<harpole@pegasus.cc.ucf.edu> writes:
>Took apart a lightning hit trap on my 10 year old Cush 40-2CD two el
>beam
>yesterday. Surprized to see a plated pair of self-tapping metal
>screws
>holding the coil wire in the trap to the alumn. element sections--one
>screw on each end of the coil, fiberglass rod insulator.
>The screws were rusted!!! and that was under the shrink wrap from the
>factory and I had added a layer of elect tape. Stainless there for
>these
>screws would be oh so much better.
I know that Cushcraft is aware of this problem. I believe that they now
ship traps with SS screws under the shrink wrap. -- Fred K1VR
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search
|