Towertalk
[Top] [All Lists]

[TowerTalk] Prop Pitch seals

To: <towertalk@contesting.com>
Subject: [TowerTalk] Prop Pitch seals
From: little_mike@ccmail.ncsc.navy.mil (little_mike@ccmail.ncsc.navy.mil)
Date: Wed, 07 May 97 12:20:28 -0600
     Does anyone know a replacement seal part # for the gearbox motor shaft 
     oil seal. I took the old seal and planetary gear assembly (to keep 
     from removing the motor shaft) with me to a couple of places here in 
     Panama City, FL. but no luck.
     
     The cartridge seal dimensions are 1.127" OD, 0.370" thick and seals 
     the 0.468" motor shaft. The wear is so bad on the seal that I can't 
     measure the seal ID.
     
     Responses greatly appreciated,
     
     Mike Little KB4KKL



--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com

<Prev in Thread] Current Thread [Next in Thread>