Towertalk
[Top] [All Lists]

[TowerTalk] Mast, Antenna and Rotator Calculator program

To: <towertalk@contesting.com>
Subject: [TowerTalk] Mast, Antenna and Rotator Calculator program
From: K7LXC@aol.com (K7LXC@aol.com)
Date: Wed, 2 Apr 1997 20:54:59 -0500 (EST)
      Thanks for the support of the latest TOWER TECH product, the MARC
Program.  This Mast, Antenna and Rotator Calculator software program takes
wind speed, antenna load and spacing and calculates the bending moment of the
system.  It then specifies a mast size, wall thickness and tensile strength.
  

     Taking the Effective Moment of the antenna array, it also recommends a
rotator.  You can also enter the dimensions of any yagi and it will calculate
the square foot wind load.

     MARC is an DOS program that requires DOS 2.0 or later running on a PC.
 It comes on a 1.4 mb diskette and can be installed on Windows 3.1 or Win95.
 Sorry, no Mac or metric version at this time.

     It's available for $9.95 + $2.55 s/h for total of $12.50 from TOWER
TECH, Box 572, Woodinville, WA, 98072.

73,  Steve  K7LXC

     TOWER TECH -- professional tower supplies for amateurs

--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com

<Prev in Thread] Current Thread [Next in Thread>
  • [TowerTalk] Mast, Antenna and Rotator Calculator program, K7LXC@aol.com <=