In a message dated 96-11-04 03:13:40 EST, you write:
>We like to have your opinion, experiences etc about commercially
>available rotators capable of handling our 40 meter yagi which is
>currently a 2 elements full-size but likely to become a 3 element next
>summer. Any reply direct to me would be welcome.
>
Hi, Alex --
IMO your options (in decending order) are:
Prop pitch -- will rotate a house and utterly reliable
Orion 2800 -- a pretty good heavy duty rotator with worm drive (no brake
required) and splined output shaft
Create RC5B-3 -- good comments from users and it has good sturdy gears in the
transmission
Yaesu G-2800SDX -- may be suitable but lacks the rotating torque of above
rotators and uses the aluminum mast clamps that are easy to overtighten
and break
The only other HD rotator that I've seen was in an Italian ham magazine
and looked like an industrial motor and transmission. There are also
commercial rotators available but are expensive.
BTW, you may want to subscribe to TowerTalk -- the tower and HF antenna
reflector. This is the kind of topic that may be more suitable for it than
the CQ Contest reflector. Send a message to towertalk-request@akorn.net with
subscribe in the message and you'll be all set. It has many knowledgeable
people that can provide valuable information. See you there.
73 and good luck -- Steve K7LXC
TOWER TECH -- professional tower supplies and services for amateurs
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: K7LXC@contesting.com
Sponsored by Akorn Access, Inc & KM9P
|