George --
Thanks for the info. Your solution sounds right.
Putting the rotor near the top with a long mast
seems like asking for trouble. My mast is 14'
long, but it is just water pipe. I don't plan on
stacking anything big (not even a 402CD).
73,
Tom - N1MM
_____________________________________
On Jun 30, 1996 10:00:29, 'gtaft@voyager.net' wrote:
>I ended up using a longer mast(like 20 feet) and put the rotator
(originally
>a Wilson but now a Create 3B) at the bottom of that flat top section. I
had
>to cut out one horizontal bar from the 25G flat top section to be able to
>remove the rotor w/o taking it all apart, when rotor repair was needed
(and
>it probably will be). I used one extra rotor plate above the rotor plate
to
>put the mast thru (abt halfway or more up the flat top section) to hold
the
>mast centered if u take out the rotor.
|