The Amphenol 21-579 I mentioned earlier is very flexible.
KB4BR
-----Original Message-----
From: Topband [mailto:topband-bounces+ham306=bellsouth.net@contesting.com] On
Behalf Of W0MU Mike Fatchett
Sent: Friday, February 14, 2020 2:40 AM
To: Andreas Junge <andreas@n6nu.org>
Cc: 160 <topband@contesting.com>
Subject: Re: Topband: RG-179 Coax
I am making some receive antennas and the coax will be for the choke that goes
through a torriod. The cores I have would not take rg6. This is from the YCCC
receive antenna array.
W0MU
On 2/13/2020 5:55 PM, Andreas Junge wrote:
> Mike,
>
> What’s wrong with RG6? Or the DX Engineering version of it:
>
> https://www.dxengineering.com/search/department/cable-and-connectors/p
> roduct-line/dx-engineering-f6-75-ohm-bulk-coaxial-cable?autoview=SKU&k
> eyword=rg6&sortby=BestKeywordMatch&sortorder=Ascending
>
> $0.30/foot
>
> Plenty good for RX antenna use.
>
> 73, Andreas, N6NU
>
>> On Feb 13, 2020, at 3:31 PM, W0MU Mike Fatchett <w0mu@w0mu.com
>> <mailto:w0mu@w0mu.com>> wrote:
>>
>> I am looking for a good source for RG-179 coax to build some RX
>> antennas. I tried an Ebay seller and got rg58!!####
>>
>> W0MU
>> _________________
>> Searchable Archives: http://www.contesting.com/_topband - Topband
>> Reflector
>
_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
|