Hi Pete,
I'd suggest you proceed with an inverted-L
73
Frank
W3LPL
----- Original Message -----
From: "N4ZR" <n4zr@comcast.net>
To: "topband reflector" <Topband@contesting.com>
Sent: Monday, October 1, 2018 3:47:37 PM
Subject: Topband: Shunt feeding AB-577/621
I have an AB-577 with a C-3E on top, and am interested in the
possibility of shunt-feeding it for 160 - 100 watts only. Anyone have
any experience with doing this? Are the section-to-section joints
adequately conductive? I would plan to use an omega match, because I'm
guessing it would be well short of a quarter wave.
My other option is an inverted L. Should I maybe just go ahead with that?
--
73, Pete N4ZR
Check out the Reverse Beacon Network
at <http://reversebeacon.net>, now
spotting RTTY activity worldwide.
For spots, please use your favorite
"retail" DX cluster.
_________________
Topband Reflector Archives - http://www.contesting.com/_topband
_________________
Topband Reflector Archives - http://www.contesting.com/_topband
|