I forgot one more issue; being it an amplified wideband RX loop, it needed a
160m bandfilter on the output in my case. Too many -30dBm BC signals from MW
and several SW bands. That lowered its noise floor another few dB's in my total
RX setup.
In that respect, and because you can built it yourself, I would rather advise
the suggested N6KR tuned loop in this thread.
73 Mark, PA5MW
On 1 feb. 2012, at 21:04, Mark van Wijk <pa5mw@home.nl> wrote:
> ALA1530S+
>
> However, It does need proper common mode filtering. And required secure
> detuning of my TX antenna to clear out re-radiated noise.
> 73 Mark, PA5MW
>
> On 1 feb. 2012, at 20:21, navydude1962@yahoo.com wrote:
>
>> Mark
>>
>> Which wellbrook model do u use?
>>
>> Sent from my iPhone
>>
>> On Feb 1, 2012, at 11:10, Mark van Wijk <pa5mw@home.nl> wrote:
>>
>>>
_______________________________________________
UR RST IS ... ... ..9 QSB QSB - hw? BK
|