Hello David:
This is an interesting question - and my love for the HyTower antenna design
promoted me to do a quick Google search for "plans for NDB transmitting
antennas". This search yielded a ton of information. Some of it looks very
useful as you think about a possible design for your LF RX antenna.
I used "transmitting" in the search so the results might more closely apply
to your possible HyTower modification.
73,
Tim K3LR
-----Original Message-----
From: topband-bounces@contesting.com [mailto:topband-bounces@contesting.com]
On Behalf Of David Michael Gaytko // WD4KPD
Sent: Sunday, January 08, 2012 12:36 PM
To: rsgb_lf_group@blacksheep.org; topband@contesting.com
Subject: Topband: hygain hytower
seeking any info on loading the hygain hytower vert antenna up on
500kc/136kc, (works FB on 160m with base coil) will be for RX only. if
you have done either pse email.
to top load a vert, must the hat radials emanate from the peak? the
construction of the hytower makes this impossible; i can however easily
connect at the top of the tower section.
david/wd4kpd
--
God's law is set in stone...everything else is negotiable.
_______________________________________________
UR RST IS ... ... ..9 QSB QSB - hw? BK
_______________________________________________
UR RST IS ... ... ..9 QSB QSB - hw? BK
|