System similar to what you mentioned regarding the gain
compensation/distribution, HPF/BPFs, RX overload, PTT, and
additional signal path sources and output routing (incl. looping
back): http://no3m.net/index.php?page=signal-processor
Has an on-board embedded MPU, but a header can be used w/
switches for manual control.
73/HNY - Eric NO3M
> If it were the 'ideal' thing, there'd be a box with a matrix of switches (A x
> B), gain blocks that could be put in/out of the circuit, BPFs that could be
> put in and out, 'muting' of any RX output that is connected to a transmitter
> that is transmitting, RX overload protection, and some general purpose inputs
> to select the 'configuration'. Probably a PIC to run it, with a nice GUI app
> to configure it.
>
>
> - Brian N9ADG
>
_______________________________________________
UR RST IS ... ... ..9 QSB QSB - hw? BK
|