Topband
[Top] [All Lists]

Re: Topband: Flooded 75 ohm coax. Belden type number?

To: Top Band List List <topband@contesting.com>, Henk Remijn PA5KT <pa5kt@remijn.net>
Subject: Re: Topband: Flooded 75 ohm coax. Belden type number?
From: Mike Waters W0BTU <mrscience65704@yahoo.com>
Date: Wed, 1 Sep 2010 00:45:04 -0700 (PDT)
List-post: <topband@contesting.com">mailto:topband@contesting.com>
I use Commscope 75 ohm flooded RG-6/U CATV coax. Much cheaper than Belden, and 
works just great on 160 for both my Beverages and for feeding my inverted-L.

You can buy a 1000 foot roll of it off eBay cheap.

73,

Mike Waters

www.w0btu.com

--- On Tue, 8/31/10, Henk Remijn PA5KT <pa5kt@remijn.net> wrote:

From: Henk Remijn PA5KT <pa5kt@remijn.net>
Subject: Topband: Flooded 75 ohm coax. Belden type number?
To: "Top Band List List" <topband@contesting.com>
Date: Tuesday, August 31, 2010, 1:13 PM

  Hi,

Most people advice to use "flooded" type coax on the receiving antennas.

I downloaded the Belden (Hirschmann) catalogue to find what I need. It 
appears they have a lot of cables.

Can someone tell me what would be type numbers I should look for?

Henk

-- 
Henk Remijn PA5KT
email: pa5kt@remijn.net
www: www.pa5kt.com

_______________________________________________
UR RST IS ... ... ..9 QSB QSB - hw? BK



      
_______________________________________________
UR RST IS ... ... ..9 QSB QSB - hw? BK

<Prev in Thread] Current Thread [Next in Thread>
  • Re: Topband: Flooded 75 ohm coax. Belden type number?, Mike Waters W0BTU <=