Topband
[Top] [All Lists]

Re: Topband: Balun for a balanced tuner

To: topband@contesting.com
Subject: Re: Topband: Balun for a balanced tuner
From: Martin <dm4im@gdxf.de>
Date: Wed, 09 Apr 2008 08:55:52 +0200
List-post: <topband@contesting.com">mailto:topband@contesting.com>
Topbanders, thanks so far for the replies. Some asked for more info on 
the tuner for clarification. Here they are:
Antenna to be matched:
2*41m Doppelzepp (is that a double bazooka for you english guys?) fed 
with abt 15m ladderline ( 12cm spacing, should result in 500-600 ohms).
Tuner: balun at input, 2* L (1 each side), 1 C switchable to either 
input (Cin) or output (Cout) of the Inductors.

                    +---------+--- L----+------
koax from TX---balun         C(in) or  C(out)   to ladderline
                    +---------+----L----+------

-- 
73, DM4iM
_______________________________________________
Topband mailing list
Topband@contesting.com
http://lists.contesting.com/mailman/listinfo/topband

<Prev in Thread] Current Thread [Next in Thread>
  • Re: Topband: Balun for a balanced tuner, Martin <=