I have also been contemplating the NCC-1 and am very interested in other views
of the NCC-1 vs. the MFJ-1025/1026. I am using two of the MFJ-1026 units - with
two seperate 35Ft. verticals as noise sensing antennas. One unit is connected
in the path with my "receive-only antennas" and the other is connected in the
path with my receive/transmit antennas. I use external TX/RX switching (I do
not use the built in RF sensing switching). They due a good job on local "birdy
noise sources."
73, Merle - W0EWM
_______________________________________________
Topband mailing list
Topband@contesting.com
http://lists.contesting.com/mailman/listinfo/topband
|