Hello Jon.
Hope to work you on 160 soon.
I'm' sure that you are aware of this, but just in case a remind that the
FT-100D has a fast AGC setting that is very useful for CW, just press the
function key to bring up the IPO, ATT, AGC, NB functions row; and by
pressing C (AGC) you can toggle the recovery time to SLOW (SLO), FAST (FST)
AND AUTO (FST).
I have used my FT-100D on 160 with excellent results, It was used on 160 CW
at 4M9YY DXpedition and we were impressed with its performance.
Have a very nice weekend.
73/DX Jose M. Valdes R. (Joe) YV5LIX
eQSL.cc Advisory Board Member
QSL manager EA7FTR
SYSOP YV5LIX DX Cluster
telnet://yv5lix.org.ve:7300
VHF Packed: 145.430 YV5LIX
http://www.yv5lix.org.ve
-----Original Message-----
From: topband-bounces@contesting.com [mailto:topband-bounces@contesting.com]
On Behalf Of Jon Rudy-MCC Asia Peace Resource
Sent: Saturday, February 19, 2005 11:09
To: Topband post
Subject: Topband: From DU9/N0NM
Just when conditions are getting good on top band, my Icom 756 quit. I am
limping along with my FT-100D as exciter but the rx is far from adequate. As
I CQ I know there are stations but can not pull them out of the noise. No
AGC off on the FT100......
_______________________________________________
Topband mailing list
Topband@contesting.com
http://lists.contesting.com/mailman/listinfo/topband
|