In my post on Beverage antennas there was an error on the transformer
info I provided.
Double all the winding values to correct it, i.e., instead of 12 turns,
make it 24 turns. The tap for 50-ohm coax is at 8 turns instead of 4 and
the 75-ohm tap is at 10 turns instead of 5. This data assumes that the
Beverage is a 450-ohm antenna.
Sorry for the mistake. My notes serve me better than my memory.
73, de Earl, K6SE
--
FAQ on WWW: http://www.contesting.com/topband.html
Submissions: topband@contesting.com
Administrative requests: topband-REQUEST@contesting.com
Problems: owner-topband@contesting.com
|