Ken,
My Omni 6+ manual dated 01/97 indicates the following adjustments on
connector 46:
CW transmit or Tune: Adjust C10 for 9.000400 MHz
LSB receive: Adjust C16 for 9.000000 MHz
USB receive: Adjust C12 for 9.003000
FSK Space: Adjust C13 for 9.002295 MHz
FSK Mark: Adjust C18 for 9.002125 MHz
Good luck.
Robb NØRU
Today's Topics:
1. Omni 6+ Manual Error? (Ken Koval)
----------------------------------------------------------------------
Message: 1
Date: Mon, 17 May 2021 09:31:25 -0500
From: Ken Koval <kakoval@cox.net>
To: tentec@contesting.com
Subject: [TenTec] Omni 6+ Manual Error?
Message-ID: <9195af95-7c63-3875-4440-10866910f7ec@cox.net>
Content-Type: text/plain; charset=utf-8; format=flowed
I'm about to adjust the BFO in my Omni 6+ but am confused by the
directions in the manual.? My understanding of the TX Audio board
indicates that C10 should adjust LSB, C16 should adjust CW, and C12
should adjust USB.? All other adjustments as well as the order in the
manual appear correct.? Am I not understanding the circuit correctly??
Is their an error in the manual?? Thanks...Ken, K9PGC
------------------------------
Subject: Digest Footer
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
------------------------------
End of TenTec Digest, Vol 221, Issue 12
***************************************
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|