TenTec
[Top] [All Lists]

Re: [TenTec] OT: Question to the group -tuner and dipoles

To: "'Discussion of Ten-Tec Equipment'" <tentec@contesting.com>
Subject: Re: [TenTec] OT: Question to the group -tuner and dipoles
From: "Paul Christensen" <w9ac@arrl.net>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Tue, 19 Jul 2016 08:33:05 -0400
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
> My particular interest right now is a good antenna for the new 475 khz 
> band that is coming.  I have a 1000 foot dipole at 50 feet and it 
> shows an excellent load at 475 khz.  My belief is this antenna will be 
> more efficient even at a 20 degree takeoff angle than a 50 foot 
> vertical that has a very large and inefficient loading coil and 
> radials.

It may model that way but at 475 kHz, surface wave propagation will likely
dominate and the vertical may be the better performer, especially  with a
large top hat.  IOW, feed that 1000 ft, 50 ft high horizontal wire at the
center (500 ft. per side) and make it into a Marconi "T" over a radial
field. 

Paul, W9AC
 

_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>