Tnx, I will try the reset.
A further clarification
When the OII is warm and I cycle the power side-tone is OK (stays at 0).
When I let it cool down for a few hours and power on the side-tone goes
to 512. Every other setting including the all the menus are keeping
their settings.
Mike
W0BBC
On 12/16/2015 9:03 AM, Mike Chatfield wrote:
I have noticed a small issue with my Orion II. It may be an indicator
of a larger issue. When I set my side-tone to zero and power off the
Orion II and cycle power back on the side-tone setting goes to 522,
everything is normal. I can reset it to 0 and it stays there. This
happens every time I cycle power.
I believe this a symptom of a flaky memory address. Does someone have
some thoughts or seen this?
Tnx for the help
Mike Chatfield
W0BBC
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|