Hey Rick,
I am glad I did not win that lottery!
Jerry W5JH
"building something without experimenting is just solder practice"
-----Original Message-----
From: TenTec [mailto:tentec-bounces@contesting.com] On Behalf Of Rick -
DJ0IP / NJ0IP
Sent: Wednesday, April 03, 2013 2:21 AM
To: 'Discussion of Ten-Tec Equipment'
Subject: Re: [TenTec] Computer Headset Secured -- Now What?
Hi John,
Yeh, I guess it's a crapshoot with these cheap headpones.
I never win anything. Been going to hamfests for 50 years and have never
won anything.
The only thing I ever won in my life was the lottery back in the 60's when
they were drawing to see who was going to get an all-expenses-paid vacation
to the far east. I was one of the lucky winners of that. It wasn't as good
as it was hyped to be - I don't look good in olive drab.
The Eagle, OM7, and Orion all have 1/4 in. stereo headphone jacks.
I have decided to build a tiny aluminum break-out box and screw it to the
side of the desk, out of site.
That way I can plug the phones/mic into it, connect a foot switch for PTT,
and then run two thin cables to the rig.
I most likely would only use the headphone/mic in contests.
For me, holding a mic in the hand is just as much a part of ham radio as
having a paddle between my fingers.
If it weren't for contesting, I would not use a headphone/mic and I would
not key CW with a computer.
73
Rick, DJ0IP
-----Original Message-----
From: TenTec [mailto:tentec-bounces@contesting.com] On Behalf Of John Farler
Sent: Wednesday, April 03, 2013 3:38 AM
To: tentec@contesting.com
Subject: Re: [TenTec] Computer Headset Secured -- Now What?
Rick,
Sorry to hear yours didn't work out, since you have given me so much help
with various TT problems. I just used ones from the dollar stores and such,
never over 10 bucks. The main reason I put the adaptor together to use them
is for the included microphone, but I don't want to get into its quality!
I'm not much of a phone op anyway, but they help in the few phone contests I
sometimes get into. Leaves hands to correct the keyboard mistakes I make!
But mine are with the older 4 pin rigs, so the newer ones may cause problems
as you describe.
If using a stereo headset, don't forget to use a 1/4" mono to 1/8"
stereo audio
adaptor to get sound in both ears. I assume the Eagle, Omni VII, etc. don't
have stereo out nor 1/8" headphone jacks.
I Want to try an adaptor and vox for 2 meter RJ45 Yaesu rig, but haven't
gotten around to it. Also looking for a 3/32" (I believe) stereo jack to
try one of these several cell phone earphone/mics and see how it works.
Can't find a jack in all my junk, but an old portable or cell phone might
render one.
RS has the plugs, but not the jacks.
73,
John, K4AVX
Message: 5
Date: Tue, 2 Apr 2013 15:53:06 +0200
From: "Rick - DJ0IP / NJ0IP"<Rick@DJ0IP.de>
To: "'Discussion of Ten-Tec Equipment'"<tentec@contesting.com>
Subject: Re: [TenTec] Computer Headset Secured -- Now What?
Message-ID: <004a01ce2fa9$6758bb90$360a32b0$@de>
Content-Type: text/plain; charset="us-ascii"
Yes, mine came in a padded mailer as well, shipped from the states.
No instructions, nothing.
I guess it's the luck of the draw.
You win, I lose!
I'll have to try them on another radio and see how they do there.
Otherwise they were a 1-day headset.
Actually my Sennheiser 414 were cheaper.
I paid about 120 deutsch mark for them over 40 years ago.
I've used them for thousands of hours!
73
Rick, DJ0IP
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|