Check your manual for the DIN jack. Mine is item #80 on page 28 & it states
that Pin 4 of the DIN connector is 'line level audio output. Which receiver(s)
are output to here and the level of audio sent to the jack are controlled by
the Line Out Src and Line Out Level commands in the Other menu."
73
Dave
WA3F
----- Original Message -----
From: "jack" <jfriend31@comcast.net>
To: "Discussion of Ten-Tec Equipment" <tentec@contesting.com>
Sent: Saturday, December 15, 2012 1:34:36 PM
Subject: [TenTec] audio from the I/O connection at the back of the Orion
Question: is there a way to turn down the audio gain from the I/O DIN
connection on the back the Orion?
I have 2 Orions and have them connected to a Yankee Clipper SO2R+ which
feeds the audio thru to headphones. turning down the main and sub AF gain
does NOTHING to the I/O gain thru the DIN connector.
there is much too much volume in the headphones. the output is so loud thru
the SO2R box that I can use the headphones as a speakers. in fact right now
I am listening without problem to a CW chat on 17 meters with the headphones
on the desk.
thanks,
jack
ak7o
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|