[TenTec] Omni-V Question

[cornell@redshift.com (Cornell)]

Omni-V model 562 ...

When placed in tune, shuts down at about 75-80 watts. Lamps remain on, power
out goes to zero, and display blanks. There is no noise when this occurs.
Input is 12.6 volts. Recycle of power switch restores normal operation.
Happens on all bands. Also happens on SSB if power level is set too high and
mic gain is increased.

Any assist would be welcome. Please reply to below e-mail. Thanks.

Max K0MC
Marina, Ca
cornell@redshift.com