[TenTec] low pwr out on 30 mtrs

["Paul Craig" <n3ysi@rcn.com>]

Jim,
    Try using the tuner with a lower inductor setting (i.e.. "c" instead of
"f" or whatever). Go thru the entire tuning routine until you find the
combination that will yield the highest PO. Remember that a dummy load will
give you a 1 to 1 match but it doesn't radiate worth beans. If you can get 2
to 1 and show 70W out your signal will be much bigger than the 35W and 1 to
1 plus the guy on the receiving end will never know the difference. Good
luck and let us know how you make out!
73,
n3ysi