The info on hook up can be found on the Alpha web site at:
http://www.alpha-amps.com/html/tentec.htm
73,
Troy, W6HV
----- Original Message -----
From: "Greg Hodsdon" <k7kj@home.com>
To: "John, ke5c" <ke5c@hot.rr.com>; "Ten-Tec Reflector"
<tentec@contesting.com>
Cc: "George, K5TR" <geoiii@loja.kkn.net>; "Tom, N5TW" <n5tw@igg-tx.net>
Sent: Sunday, July 15, 2001 6:47 PM
Subject: Re: [TenTec] Omni vi+ and Alpha 87A
>
> I've been running an Alpha 91B for several years with an Omni VI+
> and have never experienced a tripping problem. Make sure Tx Out is
> connected to "Relay" and Tx En is connected to "Key Out". Sounds
> to me you might be experiencing a hot switching problem
> Greg, K7KJ
>
>
> ----- Original Message -----
> From: "John, ke5c" <ke5c@hot.rr.com>
> To: "Ten-Tec Reflector" <tentec@contesting.com>
> Cc: "George, K5TR" <geoiii@loja.kkn.net>; "Tom, N5TW" <n5tw@igg-tx.net>
> Sent: Sunday, July 15, 2001 12:32 PM
> Subject: [TenTec] Omni vi+ and Alpha 87A
>
>
> >
> > Last weekend my friend unplugged the cables from his FT1000D, removed
it,
> > set my Omni vi+ into the same physical space, and reconnected the
cables.
> > We determined the drive level which made his Alpha 87A happy. (Jay,
that
> > plus a three antenna stack of 15 total elements is why I was loud on the
> net
> > last week.) He used the Omni and Alpha several times during the week,
but
> > early on during IARU, I kept tripping the 87A out. I reduced drive to
get
> > about 1000W out instead of 1500W, and had the same *intermittent*
problem.
> > I would make several QSO's without difficulty, not change the band or
> > antenna direction, and suddenly the 87A would trip out. I soon noticed
> that
> > the forward and reflected power on the 87A jumped just as it kicked out.
> > Thinking maybe there was a loose connnection in the antenna system, I
> > changed from 40M to 15M with the same result. We uninstalled the Omni
and
> > put his FT1000D back in place, and I operated the next 12 hours without
> > difficultly.
> >
> > Another interpretation of the forward and reflected power surging would
be
> > slow or poor ALC performance allowing a spike in the drive to the 87A
> > transiently harder. Does anyone have any experience with the Omni vi+
or
> > perhaps just generically with TenTec power amps and ALC driving an 87A
> which
> > is just loaded with protection circuitry?
> >
> > 73, John
> > P.S. the FT1000D is a fine rig, I just wanted to operate with my own rig
> for
> > psychologic reasons, so no comparisons please.
> >
> >
> > --
> > FAQ on WWW: http://www.contesting.com/FAQ/tentec
> > Submissions: tentec@contesting.com
> > Administrative requests: tentec-REQUEST@contesting.com
> > Problems: owner-tentec@contesting.com
> >
> >
>
>
> --
> FAQ on WWW: http://www.contesting.com/FAQ/tentec
> Submissions: tentec@contesting.com
> Administrative requests: tentec-REQUEST@contesting.com
> Problems: owner-tentec@contesting.com
>
--
FAQ on WWW: http://www.contesting.com/FAQ/tentec
Submissions: tentec@contesting.com
Administrative requests: tentec-REQUEST@contesting.com
Problems: owner-tentec@contesting.com
|