Henry,
It's not that critical.
Go to Radio Shack and get a four conductor cable of whatever
length is convenient for your 301 placement at your station.
Try RS part number 278-777, $8.99 for 30 feet, 4-26g with "100%
foil shield and a 75% overlap of wire braid" (?). . -- from my
96 RS catalog....
Or check Home Depot's electrical wire department and see what
they have.
73,
dale, kg5u
-----Original Message-----
From: Henry Mauro <henry@northcoast.com>
To: tentec@contesting.com <tentec@contesting.com>
To: <tentec@contesting.com>
Date: Monday, October 04, 1999 22:49 PM
Subject: [TenTec] model 301 cable
>
>I purchased a model 301 kit (remote vfo knob in a box for the
Omni 6) a
>while back. I was unable to find suitable cable for it locally.
>According to the instructions on KG5U's web site, it is supposed
to be a
>3-conductor, shielded cable. I found a 4-conductor cable but it
was too
>large to fit the strain relief provided with the kit, and the
wire
>looked large for the molex connector on the encoder. Anyone have
a part
># and/or source for the right cable?
>
>Henry, W6GZ
>henry@northcoast.com
>
>--
>FAQ on WWW:
http://www.contesting.com/tentecfaq.htm
>Submissions: tentec@contesting.com
>Administrative requests: tentec-REQUEST@contesting.com
>Problems: owner-tentec@contesting.com
>Search:
http://www.contesting.com/km9p/search.htm
>
>
--
FAQ on WWW: http://www.contesting.com/tentecfaq.htm
Submissions: tentec@contesting.com
Administrative requests: tentec-REQUEST@contesting.com
Problems: owner-tentec@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|