I just did a simple test here (with the latest version). Please try and see
if you got the same results I did.
1. Start a New Contest.
2. I picked IARU
3. Enable two radio mode.
4. Put the active radio on SSB, inactive on CW.
5. Use Alt-D to setup a station to work on CW.
6. Press space bar - then log the station.
This logged it on CW for me.
What might be happening is that if you are putting out a DVP message during the
QSO process, it might be confusing TR. If you eliminate that step - does that
solve the problem?
If we can narrow this down to that specific event, then this might be easy to
fix. But I wanted to get you to the same place I was at above.
Tree
_______________________________________________
Trlog mailing list
Trlog@contesting.com
http://lists.contesting.com/mailman/listinfo/trlog
|