Re: [Trlog] Preloading fields for SS

[Ken Beals <k6mr@pacbell.net>]

At the risk of being dead wrong:

If you build a file with spaces in between the data, I believe you can 
add the data using the utilities by indicating what column the data 
starts in.  I've added data from a log file by doing that.

You don't need commas between the strings.

Ken

Eric Hilding wrote:

> Tnx to all who responded directly or as a Post.
>
> Re-reading through the TR Manual, I think I've decided to take a whack 
> at:
>
> USER INFO SHOWN = CUSTOM
> CUSTOM USER STRING = CHECK SECTION
>
> *** NOTE:  I can't tell from the Manual if I should have a "comma" 
> between CHECK and SECTION or not.
>
> If I understand this option correctly, the exchange window will NOT be 
> pre-filled, but at least I will have some possible verification data 
> showing for reference if needed.
>
> I think my TRMASTER entries would be like:
>
> K6VVA =ASCV = K57     (SEC = SCV & CK = 57)
>
> Now, the $64,000 question is: Can I use a comma delimited ascii file 
> like:
>
> K6VVA,SCV,57
>
> ... to auto-build the TRMASTER, or do I need to construct it as:
>
> K6VVA =ASCV = K57
>
> ???
>
> Tnx & 73...
>
> Rick, K6VVA
>
>
> _______________________________________________
> Trlog mailing list
> Trlog@contesting.com
> http://lists.contesting.com/mailman/listinfo/trlog

_______________________________________________
Trlog mailing list
Trlog@contesting.com
http://lists.contesting.com/mailman/listinfo/trlog